Procedure
............................................................................................................................................................
1
Select and prepare terminal for RC/V activities.
Reference:
“Select and Prepare Terminal” (5-11)
............................................................................................................................................................
2
Type and enter the RC/V form number.
17.24
Result:
Enter Database Operation I=Insert, R=Review,
D=Delete:
............................................................................................................................................................
3
Type and enter the insert command.
I
Result:
The QPH PIPE ASSIGNMENT page is displayed and the cursor
is located at the GLOBAL SM field.
............................................................................................................................................................
4
Using the RC/V 17.24 form as a guide, type and enter the parameters.
• *GLOBAL SM
• *PSU SHELF
• *CHANNEL GROUP
• *QLPS NETWORK
• #SERVICE TYPE - SIPT
............................................................................................................................................................
5
Enter the insert command.
I
Result:
Inserting...form inserted
............................................................................................................................................................
6
Type and enter the previous screen command.
<
Result:
CM MODULES VIEW page is displayed.
Assign QPH Pipe (RC/V 17.24)
Provisioning
....................................................................................................................................................................................................................................
5-24
Lucent Technologies 235-200-118
Issue 3.02B, March 2007
To Next Page
Loading...
