2
Result:
Screen 2 of the INTERNET PROTOCOL (IP) PROCESSOR
ASSIGNMENT page is displayed and the cursor is located at
the REASSEM TIMER field.
............................................................................................................................................................
7
Using screen 2 of RC/V 33.1 change the following field.
• #MTU ENABLE - Y
............................................................................................................................................................
8
Proceed to screen 3.
3
Result:
Screen 3 of the INTERNET PROTOCOL (IP) PROCESSOR
ASSIGNMENT page is displayed and the cursor is located at
the ICMP ERR GEN field
............................................................................................................................................................
9
Using screen 3 of RC/V 33.1 modify the following fields.
• #ICMP ERR GEN
• #IP FRAGMENT - Y
• #MTU INTVL AFT FAIL - 600
............................................................................................................................................................
10
Enter the insert command.
I
Result:
Warnings are displayed.
............................................................................................................................................................
11
Enter the ignore command for each Warning.
I
Result:
Ignoring...form inserted.
............................................................................................................................................................
12
Type and enter the previous page command.
<
Assign PH Channel Group as IP Processor
(RC/V 33.1)
Provisioning
....................................................................................................................................................................................................................................
5-36
Lucent Technologies 235-200-118
Issue 3.02B, March 2007
To Next Page
Loading...
