• REQUEST URI CSEL
• TO HEADER
• FROM ADDR
• FROM NAME
• FROM OLI
• P-ASSERTED ADDR
• P-ASSERTED NAME
• DIVERSION
• MAX FORWARDS
............................................................................................................................................................
6
Enter the insert command.
I
Result:
Inserting...form inserted
A list of near endpoints is displayed.
............................................................................................................................................................
7
Type and enter the previous screen command.
<
Result:
The TRUNK VIEWS page is displayed.
............................................................................................................................................................
8
If desired, type and enter the quit command to exit the RC/V system.
Q
Result:
The RC/V session is terminated.
............................................................................................................................................................
9
Stop. You have completed this procedure.
Insert SIP PSTN Interworking Parameter Set
(RC/V 5.83)
Provisioning
....................................................................................................................................................................................................................................
5-76
Lucent Technologies 235-200-118
Issue 3.02B, March 2007
E ND OF S TEPS
............................................................................................................................................................
To Next Page
Loading...
Need help?
General
