Lucent Technologies 5ESS - Page 246

Reference:
“Select and Prepare Terminal” (5-11)
............................................................................................................................................................
2
Type and enter the RC/V form number.
5.82
Result:
Enter Database Operation I=Insert,R=Review,U=Update,
D=Delete:
............................................................................................................................................................
3
Type and enter the insert command.
I
Result:
The SIP-T PARAMETERS DEFINITION page is displayed and
the cursor is located at the PARM SET NAME field.
............................................................................................................................................................
4
Type and enter the *PARM SET NAME field value.
............................................................................................................................................................
5
Using the RC/V 5.82 form as a guide, modify the timers and
parameters if necessary.
• INVITE TMR
• NON INVITE TMR
• WAIT FOR ACK
• WAIT FOR UPDATE
• INIT RETR TMR
• AUTOMATIC ACM TMR
• SIG SERVICE
• SERVICE CDPT
• TRUST ISUP
• MSG BUNDLE DELAY
• ISUP ENCAPSULATION
• PRACK ENABLED
• WAIT FOR PRACK
NOTE: The service provider is responsible for ensuring proper
coordination of its switches. If SIP without Encapsulated ISUP is
Insert SIP Parameters (RC/V 5.82)
Provisioning
....................................................................................................................................................................................................................................
5-80
Lucent Technologies 235-200-118
Issue 3.02B, March 2007