............................................................................................................................................................
2
Type and enter the RC/V form number.
33.22
Result:
Enter Database Operation I=Insert,R=Review,U=Update,
D=Delete:
............................................................................................................................................................
3
Type and enter the review command.
R
Result:
SCTP ASSOCIATION page is displayed and the cursor is
located at ASSOC NUMBER field
............................................................................................................................................................
4
Using the RC/V 33.22 form as a guide, type and enter the appropriate
values for each field.
• *ASSOC NUMBER
............................................................................................................................................................
5
Enter the review command.
R
Result:
View is updated.
............................................................................................................................................................
6
Determine if the association is assigned to an association set. If it is,
delete the SCTP association from the association set using the “Delete
SCTP Associations from Existing Association Set” (6-99) procedure.
............................................................................................................................................................
7
Execute the following command to verify the status of all provisioned
associations:
OP:STATUS,SCTP,ASSOC=XXXX;
Where:
XXXX = association number
Result:
The “OP STATUS SCTP ASSOC =XXXX” output report is
printed, with the status of the association, and it’s Near and Far
Endpoint names.
Delete Existing SCTP Association to SCTP
Far Endpoint
Deprovisioning
....................................................................................................................................................................................................................................
6-102
Lucent Technologies 235-200-118
Issue 3.02B, March 2007