............................................................................................................................................................
12
Dump the IPPING/5884 office records. At the MCC or TLWS type
and enter the command:
OP:OFR:FORM=5884;
Result:
OP:OFR:FORM=5884 PF is printed followed by a printout of
the IPPING/5884 office records.
............................................................................................................................................................
13
Determine if there are IP Ping parameters assigned to the Ethernet IP
interface. If there are, delete only the selected records using the
“Delete All Router Pinging (RC/V 33.17)” (6-50) procedure.
............................................................................................................................................................
14
Delete only the selected processor group using the “Delete All SIP
Processor Groups (RC/V 33.16)” (6-63) procedure.
............................................................................................................................................................
15
Delete IP processor assignment for all channel groups in the processor
group. See ’Delete IP processor assignment to PH’ procedure.
............................................................................................................................................................
16
For the PSU shelf of each channel group in the deleted processor
group, verify that the GRP TYPE is NULL, and update the PH TYPE
from PHE2 to NULL using the procedure “Update All PHE2 & PH33
Channel Group Assignments (RC/V 22.16)” (6-75) .
............................................................................................................................................................
17
At the MCC or TLWS type and enter the backup command.
BKUP:ODD;
Result:
BKUP ODD COMPLETED
............................................................................................................................................................
18
Execute the Hardware Degrowth procedures for each PHE2 and
Ethernet Link in the processor group.
Refer to 235-105-331, Hardware Change Procedures - Degrowth.
............................................................................................................................................................
19
Stop. You have completed this procedure.
Delete Existing SIP PHE2 IP Processor
Group
Deprovisioning
....................................................................................................................................................................................................................................
6-112
Lucent Technologies 235-200-118
Issue 3.02B, March 2007
E ND OF S TEPS
.........................................................................................................................................................................................................................................................
To Next Page
Loading...
Need help?
General
