TST:PATH,SCTPHB,ASSOCSET=a;
Where:
a = association set name
Result:
Generates an SCTP heartbeat report for each association in an
association set in a specific association set. If the result is other
than
COMPLETED: TEST PASSED, then CONTINUE with this
procedure. Otherwise, EXIT this procedure.
............................................................................................................................................................
2
Check results and take appropriate action:
• If the result is
NG - INVALID ASSOCIATION SET NAME, then
examine the associated office record 5890.
Refer to Translation Guide (TG-5), 235-080-100, for obtaining
office record numbers.
• For all others, refer to the Output Messages Manual,
235-600-750, for additional information.
............................................................................................................................................................
3
Stop. You have completed this procedure.
Procedure
............................................................................................................................................................
1
Initiate a manual heartbeat test on a specific packet group:
TST:PATH,SCTPHB,PKTG=b;
Where:
b = Packet group
Result:
Generates an SCTP heartbeat report for each association in an
association set that serves a specific packet group. If the result is
other than
COMPLETED: TEST PASSED, then CONTINUE with
this procedure. Otherwise, EXIT this procedure.
Initiate SCTP Heartbeat
Maintenance Considerations
....................................................................................................................................................................................................................................
235-200-118
Issue 3.02B, March 2007
Lucent Technologies
7-19
E ND OF S TEPS
............................................................................................................................................................