214323 260 Revision B
Figure 4.266: John Deere S7 Display – Feeder House
Calibration
8. Select CALIBRATE (A) at the bottom of the page. A
calibration overview appears.
Figure 4.267: John Deere S7 Display – Feeder House
Calibration
9. Read the calibration overview, and then press START.
Figure 4.268: John Deere S7 Display – Feeder House
Calibration
10. Follow the instructions on the page. As you proceed
through the calibration process, the display will
automatically update to show the next step.
AUTO HEADER HEIGHT CONTROL
To Next Page
Loading...
