MacDon FlexDraper FD75 - Page 294

214323 276 Revision B
1016057
A
Figure 4.300: New Holland Combine Display
7. Select HEAD 2 (A). The HEADER SETUP 2 page appears.
1016062
A
B
C
D
Figure 4.301: New Holland Combine Display
8. Select the AUTOFLOAT drop-down arrow and set
AUTOFLOAT to INSTALLED (A).
9. Select the AUTO HEADER LIFT drop-down arrow and set
AUTO HEADER LIFT to INSTALLED (B).
NOTE:
With the AUTO HEADER LIFT feature installed and the AHHC
system engaged, the header will lift up automatically
whenever you pull back on the hydro handle.
10. Set the values for MANUAL HHC RAISE RATE (C) and
MANUAL HHC LOWER RATE (D) according to harvest
conditions.
1016147
A
B
Figure 4.302: New Holland Combine Display
11. Set the values for HHC HEIGHT SENSITIVITY (A) and HHC
TILT SENSITIVITY (B) according to harvest conditions.
AUTO HEADER HEIGHT CONTROL