92 Matrix PRASAR UCS System Manual
• Enter New Password. All ASCII characters (except Percentage %, Hash #, Equal to =, Plus +, And &,
Backslash \, Less than <, Greater than >, Apostrophe ’ , Double Quote " and Space) are allowed. The
new password must be:
• a minimum of 6 characters to a maximum of 12 characters.
• include atleast one upper-case, one lower-case, one number and one special character.
•In Confirm New Password, re-enter the new password to confirm.
• Click Submit to save your new password.
For Programming from Extensions
• Under For Programming from Extensions,
• Enter New Password. The new password can be a minimum of 4 digits to a maximum of 12 digits. The
valid digits are from 0 to 9.
•In Confirm New Password, re-enter the new password to confirm.
• Click Submit to save your new SA password.
• Log out of SE mode to enter SA mode.
For the list of SA commands supported on your extension, refer “SA Commands”.
The SA password is a code for preventing unauthorized access to the SA mode. As this password is meant
for restricting access to the SA mode, we strongly recommend you to:
• Keep the password secret.
• Select a complex password that cannot be easily guessed.
• Change the password regularly. See “System Security”.
• Not to use the “Remember Password” property of your Web Browser.
To Next Page
Loading...