Matrix PRASAR UCS - Device Management

Matrix PRASAR UCS System Manual 313
Device Management
PRASAR UCS supports Auto Detection and Auto Provisioning of third party IP Phones as well as Extended Clients.
Device Management is a touch-free, plug and play feature and is an ideal solution for a large deployment of
phones. To use this feature you must plug all the IP phones in same network (recommended) and also make sure
that these phones are registered as SIP Extensions at Location 1 only. The system will support Auto Detection and
provisioning of all these phones (third party IP Phones and Extended Clients).
Once you connect the phones the details will be displayed on the Device Management page.To use this feature,
• Login as System Engineer.
• Under Configuration, click VoIP Configuration.
• Click Device Management.
• The following information will be displayed for each connected phone:
• Device Name: It displays the name of the phone you connected/application you register.
• MAC Address / Device ID: It displays the MAC or Device ID of the phone.
• IP Address: It displays the IP Address of the phone.
• Last Seen: It displays the date and time, when the system detects the connected phone.
• Assign: If the phone is already configured, it displays the Name, Extension Number and Location
Number. If you wish to edit the details, click on this detail link.