1098 Matrix PRASAR UCS System Manual
Station Message Detail Recording-Online
What's this?
The PRASAR UCS can generate report for the calls as and when the call is made and send the report to the
computer.
PRASAR UCS also supports a Syslog Client for SMDR. The Syslog Client enables the system to send call records
in syslog format to the remote ‘Syslog Server’. You can view the call records on the remote server. PRASAR UCS
supports SMDR only on TCP.
SMDR generated as and when calls are made or received is called SMDR Online report. In the SMDR Online
report,
•Each Internal call is stored with following fields:
• Extension who made the call.
• Extension to which the call was made.
• Date and time when the call was made.
• Duration of the call in seconds.
• Each Outgoing call is stored with following fields:
• Extension who made the call.
• Trunk line port used for the call.
• Number dialed.
• Date and time when the call matured.
• Duration of the call in seconds.
• Call Units.
• Call Maturity Type.
• Call Type (Normal, DISA, ECF etc.).
• Each Incoming call is stored with the following fields:
• The Trunk on which the call is received.
• Extension number which answered the call.
• Date and time when the call was received.
• Calling Number.
• Hold, speech, ring duration of the call in seconds.
How to configure
To get the Online report you must do the following:
• Enable SMDR Storage in the SMDR buffer. See “Station Message Detail Recording-Storage”.
• Enable and configure the Destination IP Address and Port for Incoming, Outgoing and Internal calls.The
Online report is sent to this address as soon as the call is completed.
To Next Page
Loading...