Matrix PRASAR UCS System Manual 1079
Station Message Detail Recording (SMDR)
What’s this?
The PRASAR UCS can record the details of Internal, Incoming and Outgoing calls made from/to all the extensions.
This feature is called Station Message Detail Recording (SMDR).
You can store SMDR; obtain SMDR as a Report whenever you want or obtain it Online, immediately after the call
has been made or received. You can also use SMDR to calculate the cost of the calls.
To be able to use SMDR, you must configure:
• SMDR Storage: These parameters are configured to enable the storing of the IC, OG and Internal calls.
To know more, see “Station Message Detail Recording-Storage”.
• SMDR Report: These parameters are configured to assign destination port for getting report of IC, OG
and Internal calls and to get offline report. To know more, see “Station Message Detail Recording-Report”.
• SMDR Online: These parameters enable you to obtain Online report of Incoming, Outgoing and Internal
calls. With Online SMDR you can obtain details of each call immediately after the call has been made or
received. You can also set the call record format you want for Incoming calls when PRASAR UCS is
interfaced with a third party call accounting software (CAS). To know more see,“Station Message Detail
Recording-Online”.
• SMDR Posting: These parameters enable you to interface third-party call accounting software (CAS) with
PRASAR UCS for call cost calculation. You can select the protocol supported by the call accounting
software and further customize the handshaking parameters and call record formats. To know more see,
“Station Message Detail Recording-Posting”.
Refer to the Hospitality Manual for more details about PMS.
To Next Page
Loading...