Matrix PRASAR UCS System Manual 93
You can log into the SA mode through Jeeves or from extensions only after you have set the password
from SE mode. The password can be set using Jeeves only and it must be as per the specifications given
below:
• It must be a minimum of 6 characters and a maximum of 12 characters.
• It must include at least one upper-case, one lower-case, one number and one special character.
• All ASCII characters (except Percentage %, Hash #, Equal to =, Plus +, And &, Backslash \, Less than
<, Greater than >, Apostrophe ’ , Double Quote " and Space) are allowed.
To provide additional security,
• the password will be valid for 90 days only and you will not be able to login with the existing password
after 90 days. You will be prompted to change the password.
• if you enter a wrong password for five times consecutively within 10 minutes, the system will block the
source IP Address for 10 minutes. This activity will be logged in the “System Activity Log”.
Once the SA password is set, you can log into the SA mode through Jeeves.
To enter the SA mode,
• On the Login page, in Login as select System Administrator.
•In Password, enter the new SA password.
• Click Login.
Front Desk User Mode
The Front Desk Mode is relevant only for the Hospitality Application of the PRASAR UCS.
This mode is meant for the personnel at the Front Desk of the Hotels/Motels, allowing them access to and
operation of the hospitality features of PRASAR UCS, for example: Check-In/Out of guests, Changing Room
Occupancy and Clean Status, setting Call Budgets for guests, setting Wake-up calls, Reminders, Do Not
Disturb for guests, printing Call Reports and Hotel reports, and several others.
To Next Page
Loading...