1172 Matrix PRASAR UCS System Manual
Toll Control
What's this?
Toll Control (or Toll Restriction) is an expense control feature of PRASAR UCS. It enables you to configure the
system so that each extension has a designated calling permission referred to as 'Call Privilege'.
Each type Call Privilege allows the extension to call certain areas and restricts it from calling others.The extension
can also be restricted from dialing the specific telephone numbers.
The PRASAR UCS supports five types of Call Privileges, these are:
• No Calls: Dialing of all external numbers is restricted. Only internal (extension-to-extension) calls are
allowed.
By default, only the numbers configured in Global Directory Part 1 will be allowed to be dialed out as it is
enabled in the Class of Service of the extension.
If you have enabled Global Directory Part 2 and 3 in the Class of Service of the extension, the numbers
configured in these also will be allowed to be dialed out.
• Local Calls: Dialing of outgoing calls to Local area numbers, in addition to internal calls, is allowed. It is
possible to restrict calls to certain local numbers. To apply this Call Privilege, you must configure the 'Local
Numbers' list.
• Regional Calls: Dialing of outgoing calls to regional numbers is allowed, in addition to internal and local
calls. It is possible to restrict calls to certain regions. To apply this Call Privilege type, you must configure
the 'Regional Numbers' list.
• National Calls: Dialing of domestic, long-distance numbers within the country is allowed, in addition to
internal and regional calls. You can also restrict calls to certain parts of the country. To apply this Call
Privilege type, you must configure the 'National Numbers' list.
• International Calls: Dialing of international numbers is allowed, in addition to local area, long distance
and internal numbers. You can also restrict calls to certain countries. To apply this Call Privilege type, you
must configure the ‘International Numbers’ list.
• All Calls: Dialing of all types of numbers - local, regional, national, international- is allowed, without any
restriction.
• Limited Calls: Dialing of only specific Telephone numbers (local, regional, national or international) is
allowed. By applying this Call Privilege type, you can allow and restrict dialing of telephone numbers
starting with a particular digit, or a particular area code, or certain telephone numbers only. To apply this
Call Privilege type, you must program a list of the ‘Limited Numbers’ that are to be allowed and numbers
that are to be restricted. You can configure three such ‘Limited Numbers’ lists.
Toll Control forms the basis of the features Dynamic Lock, Call Budget on Extension and Call Budget on Trunk.
Using “Dynamic Lock”, extension users can change the Toll Control (Call Privilege) of their extensions on their own.
The Operator or System Administrator can also change the Toll Control of the extension using Dynamic Lock. To
support this feature, PRASAR UCS offers fours levels of Toll Control, from 0 to 3.
To Next Page
Loading...