Matrix PRASAR UCS - Configuring Trunks; Templates for Configuring Trunk Lines; SIP Hardware Template

Matrix PRASAR UCS System Manual 344
CHAPTER 6 Configuring Trunks
The PRASAR UCS supports 99 SIP Trunks.
Templates for Configuring Trunk Lines
PRASAR UCS offers the following Hardware and Software Feature Templates to make the configuration of Trunks
easy.
• SIP Hardware Template (for SIP Trunks and SIP Extensions)
• Trunk Feature Template (for SIP Trunks)
Using these templates, you can configure all Trunks that are to be assigned the same set of hardware and software
features at one go, instead of configuring each trunk individually.
SIP Hardware Template
The SIP Hardware Template contains a set voice quality related features such as Voice Codec selection, Tx and
Rx Gains, Echo Cancellation, Jitter Buffer and, Fax-over-IP options and related parameters.
A SIP Hardware Template must be assigned to all SIP Trunks as well as SIP Extensions. Using the SIP Hardware
Template, you can configure SIP Trunks and Extensions to have the same set of features at one go.
PRASAR UCS offers 32 SIP Hardware Templates, which can be customized as per the requirement and applied on
SIP Trunks and Extensions.