Matrix PRASAR UCS - Station Message Detail Recording-Report

Matrix PRASAR UCS System Manual 1085
Station Message Detail Recording-Report
What's this?
The PRASAR UCS can generate SMDR reports in two modes:
• Online: as and when a call is made or received (see “Station Message Detail Recording-Online”)
Or
• Offline: whenever required, the records of calls stored in the buffer can be printed.
Generation of call record reports offline, is called SMDR - Report.
You can generate SMDR Report, either
• Manually: The report is generated whenever you want.
Or
• As per Schedule: The report is generated on a preset Day, Date and Time.
PRASAR UCS allows you to set a variety of filters for printing SMDR Reports.
PRASAR UCS supports SMDR-Reports on IP Ethernet Port.
How to configure
To be able to generate SMDR -Report, you must do the following:
• Enable SMDR Storage in the SMDR buffer. See “Station Message Detail Recording-Storage”.
• Enable and assign the Destination port for Incoming, Outgoing and Internal calls.
Configuring SMDR-Report using Jeeves
• Login as System Engineer.
• Under Configuration, click Station Message Detail Recording.