1048 Matrix PRASAR UCS System Manual
Room Monitor
What’s this?
This feature enables the Extended IP Phone Extension users to listen to the conversations taking place in another
location where an Extended IP Phone is present.
Room Monitor can be used to monitor activities on the Shop Floors / Manufacturing areas from another location.
• Use this feature in accordance with the local privacy laws.
• Matrix Comsec is not responsible for any mis-/abuse of this feature by users.
How it works
• A is a supervisor in a Manufacturing unit.
• A’s room in on the second floor. The manufacturing area is on the ground floor.
• To keep track of the activities in the plant on the ground floor, there must be an Extended IP Phone at the
place where the activities are to be monitored, and A’s extension must have higher “Priority” than the
extension at the monitored location.
• If there is an Extended IP Phone at the desired location, A can activate Room Monitor.
A can activate Room Monitor only if the Extended IP Phone at the desired location is idle.
• When A activates Room Monitor, the microphone of the Extended IP Phone on the ground floor goes Off-
hook. A can now hear all the sounds taking place on the ground floor, without anyone present there coming
to know that they are being monitored.
• To end Room Monitor, A must disconnect.
• Room monitoring will be terminated on the Extended IP Phone on the ground floor, if someone lifts the
handset of this phone or if there is a call on this phone from another extension.
You can activate Room Monitor from any extension port type, but the extension being monitored must be
an Extended IP Phone.
How to configure
To be able to use Room Monitor, extension users must have this feature enabled in the “Class of Service (COS)” in
the “Station Basic Feature Template” assigned to their extensions.
To Next Page
Loading...