176 Matrix PRASAR UCS System Manual
Configuring Matrix SPARSH VP330
SPARSH VP330 is the proprietary Extended IP Phone with graphical touch-screen user interface, supplied by
Matrix. The feature-rich SIP based phone support most of the features and function, to know the list of features
supported, refer to “PRASAR UCS Features Supported in Terminals”.
For detailed product information and operation instructions, refer to the SPARSH VP330 User Guide.
To be able to use SPARSH VP330
28
as SIP Extensions, you must configure the following:
• SIP Extension General Parameters, see “Configuring SIP Extension General Parameters”.
• SIP Extension Settings, see “Configuring SIP Extension Settings using Jeeves”
• Extended Phone Settings, see “Configuring Matrix Extended Phone Settings using Jeeves”
• Voice Mail Settings, if you want to provide mailbox facility to the extension. See “Extension Voice Mail
Settings”.
Configuring SIP Extension Settings using Jeeves
• Login as System Engineer.
• Under Configuration, click VoIP Configuration.
• Click SIP Extension Settings.
The page of SIP Extension 1 opens.
• You may select the SIP Extension number you want to configure.
The parameters of the SIP Extension number you selected will appear on this page.
28. PRASAR UCS supports only IPv4 Addresses for registering SPARSH VP330.
To Next Page
Loading...