338 Matrix PRASAR UCS System Manual
Configuring VoIP Parameters
Configuring VoIP Parameters using Jeeves
• Login as System Engineer.
• Under Configuration, click VoIP Configuration.
• Click VoIP Parameters.
VoIP Server Domain
• Click VoIP Server Domain to expand.
• VoIP Server Domain: This parameter is of relevance only if you are configuring SIP Extensions.
The system is capable of maintaining a domain for registering SIP clients (any SIP-enabled device) as SIP
Extensions.
Configure the Server Domain if you want SIP clients to register with the Registrar Server of the system
using the domain handled by the system
62
. The Domain Name can be a maximum of 40 characters.
Default: Blank.
62. SIP clients can be registered with the system either using the domain handled or using the WAN or LAN Port IP Address.
If domain is programmed, the system will listen for the SIP message which is redirected to the programmed domain only. It will also
listen for SIP messages on the WAN IP address and LAN IP address.
But if domain is not programmed, the system will listen for SIP messages only on the WAN IP Address and LAN IP address.
To Next Page
Loading...