Matrix PRASAR UCS System Manual 955
Logical Partition
What's this?
Logical Partitioning is used to restrict the flow of call traffic between Private Networks as well as between VoIP
networks.
This feature may be used when you want to allow calling between certain networks / IP Addresses only.
Logical Partition is applied on the SIP Trunks as well as SIP Extensions.
How it works
Let us understand this with the help of the following example:
• You want to allow calling from all the IP addresses within networks
• You want to allow calling from a single IP address only.
To allow incoming and outgoing calls from all the IP addresses in the network,
• you need to disable the VoIP to VoIP calling.
• configure the particular IP address, 192.168.5.0 as the IP address
• configure the Subnet as 255.255.255.0
To allow incoming and outgoing calls from a particular IP addresses in the network,
• you need to disable the VoIP to VoIP calling.
• configure the particular IP address, 192.168.5.0 as the IP address
• configure the Subnet as 255.255.255.255
In this way the calling can be restricted as per your requirement.
Matrix recommends you to enable the logical partition in order to avoid any toll bypass wherever
necessary. Matrix will not be responsible in case of any discrepancy related to this.
To Next Page
Loading...