Matrix PRASAR UCS - System Fault Log Display

Matrix PRASAR UCS System Manual 1137
System Fault Log Display
What’s this?
The PRASAR UCS provides a facility to display the last fault monitored on the system on the System
Administrator’s extension phone. The system also provides you the facility to view all the faults through Jeeves. To
know more, see “How to use” in “System Fault Log”.
How it works
To be able to use this feature optimally, the System Administrator extension phone must be an Extended IP Phone,
and a DSS Key must be assigned on the phone to System Fault Log.
• When a fault occurs, the LED of the DSS Key assigned for the System Fault Log, glows.
• The System Administrator may press any key or dial the System Fault Log feature access code to
acknowledge it.
• On pressing any key or dialing of the acknowledgment command, the LED of the Fault Log key is turned
OFF.
How to use
To view the System Fault Log from System Administrator Mode,
• Go Off-hook.
• Press the DSS key assigned to System Fault Log Display.
• The Fault log appears on your phone’s display in this format: Date-Time-Fault Index
The Date and Time are in <DD-MM- HH:MM:> format
The Activity Index is a two digit number.To know the index details, refer “System Fault Log”