Matrix PRASAR UCS - Configuring Matrix SPARSH VP510

Matrix PRASAR UCS System Manual 193
Configuring Matrix SPARSH VP510
SPARSH VP510, the Premium IP Phone is engineered to offer a contemporary design with crystal-clear audio and
feature-rich capabilities at economical price. To know the list of features supported, refer to “PRASAR UCS
Features Supported in Terminals”.
For instructions on how to use SPARSH VP510, refer to the EON510_SPARSH VP510 User Guide.
To be able to use SPARSH VP510
33
- Extended IP Phone, you must configure the following:
• SIP Extension General Parameters, see “Configuring SIP Extension General Parameters”.
• SIP Extension Settings, see “Configuring SIP Extension Settings using Jeeves”
• Extended Phone Settings, see “Configuring Matrix Extended Phone Settings using Jeeves”
• Voice Mail Settings, if you want to provide mailbox facility to the extension. See “Extension Voice Mail
Settings”.
Configuring SIP Extension Settings using Jeeves
• Login as System Engineer.
• Under Configuration, click VoIP Configuration.
• Click SIP Extension Settings.
The page of SIP Extension 1 opens.
• You may select the SIP Extension number you want to configure.
The parameters of the SIP Extension number you selected will appear on this page.
33. PRASAR UCS supports only IPv4 Addresses for registering SPARSH VP510.