434 Matrix PRASAR UCS System Manual
Language Selection Profile
Language Selection Profile is a menu which allows you to select the language. The languages you configure in the
“Supported VMS Language” will be displayed under Language selection options. You may add a maximum of 8
profiles.
If Language Selection Profile assigned to any parameter is deleted, the system will consider the first Language
Selection Profile.
How to Configure
• Login as System Engineer.
• Under Configuration, click VMS Configuration.
• Click the Language Selection Profile.
You may add a new profile, edit the default profile or delete a Language Profile.
To add a new Language Profile,
• Click Add New Profile. A new Language Profile x will be created. You may now configure this as per your
requirement.
To delete a profile, click Delete.
The default Language Profile cannot be deleted.
To edit a Language Profile,
•In Profile Name, you may assign a name to the Language profile. By default, it is Language Selection x,
where x is the Language Profile Number from 1 to 8.
To Next Page
Loading...