Matrix PRASAR UCS System Manual 435
Language Selection Options
The languages that are added in the system are displayed here. For details, see “Configuring VMS General
Parameters”.
You can assign the Digits(0-9, *, # or None) to each of the Languages.
The digit you configure will be played as the digit to be dialed by the caller to select the respective language. The
options will be played in the sequence — 1-9, 0, *, # — as per the Digits configured. The language for which the
Digit selected is None will not be played.
The option you configure for a language will be played in the respective language.
For Example, you selected the Digit 5 to be played for Italian language. The option will be played along with the
digit to dial (as configured) in Italian Language.
No Digit Dialed Settings
No Digit Dialed Settings are applicable when caller has not dialed any digit to select the desired Language and the
first digit wait timer has expired.
•In No Digit Dialed Prompt, select the prompt you wish to play when caller has not dialed any digit for
option selection.
Select None, if you do not wish to play any prompt.
• Click Settings . The Prompts Management page opens.
You may add a new prompt from here. For further details, see “Prompts Management”.
Once the files are uploaded these appear as options for No Digit Dialed Prompt.
• Select the No Digit Dialed Retry check box to allow the Language selection options to be played again if
no digit has been dialed.
•In No Digit Dialed Retry Count, select the number of times you wish to prompt the caller for language
selection. The language selection options will be played repeatedly till the Retry Count expires.
•In Retry Count Expiry Prompt, select the prompt you wish to play when the Retry Count expires.
Select None, if you do not wish to play any prompt.
• Click Settings . The Prompts Management page opens.
To Next Page
Loading...