Matrix PRASAR UCS System Manual 895
Flashing on Trunks (Continued Dialing)
What’s this?
ITSP’s support features like call waiting, call forward, etc. To be able to use these features, users need to dial
certain codes during speech.
When a system is connected between the user and the ITSP’s, the codes for dialing the features of the ITSP’s may
clash with the codes for accessing the features of the system, making it difficult for users to access the features of
the ITSP’s while in speech.
To overcome this, PRASAR UCS supports Flashing on Trunks (Continued Dialing), which informs the system about
the codes dialed for the features of the ITSP’s on trunks by extension users.
How to configure
To be able to use this feature, Continued Dialing must be allowed to the extension in its “Class of Service (COS)”.
How to use
For Extended IP Phone Users
While in speech on trunk,
• Press ‘Transfer’ Key, dial * and the Desired Service Provider Code.
Or
• Press DSS Key assigned to Flashing on Trunks (if programmed).
• Dial the Desired Service Provider Code.
To Next Page
Loading...