Matrix PRASAR UCS - Extension Search

Matrix PRASAR UCS System Manual 337
Extension Search
Using Extension Search, you can search for the extensions configured by you as well as find out the Software ports
that are not assigned Extension Numbers.
You can search for any extension by:
• Extension Number
• Extension Name
• Software Ports not assigned Extension Numbers
• The number of extensions that the system will search for depends on the total extensions programmed
in System Pre-requisites.
• If you are searching using Extension Name, make sure you enter the name as configured in the
system.
Configuring Extension Search using Jeeves
• Login as System Engineer.
• Under Configuration, click Extension Search.
• Select the desired Extension Search option from the following:
• Extension Number: If you select this option, enter the Number of the extension you want to search.
• Extension Name: If you select this option, enter the Name of the extension you want to search.
• Software Ports not assigned Extension Numbers: If you select this option, select the type of
extension— Department Group, SIP Extension, Virtual Extension —for which software ports are not
assigned any extension numbers.
• Click Search. The search result appears on the screen.