Matrix PRASAR UCS - Page 345

336 Matrix PRASAR UCS System Manual
• Select the Operator number you want to configure. By default Operator 1 is assigned to all extensions and
trunks.
• Select the number of the Time Table you prepared for the selected Operator.By default 1 is assigned.
• Enter the number of the Routing Group you prepared for the selected Operator for Working Hours, for
Break Hours and for Non-Working hours. If the same Routing Group is to be kept for all Time Zones, enter
the same number in fields of all three time zones.
• Click Submit to save your changes.
• Repeat the above steps to configure another Operator.
Now, you may assign the 'Operator' groups you have configured to the SIP extensions by configuring the
number of the Operator (1-20) in the “Station Basic Feature Template” applied on these extensions.
Similarly, you may assign the 'Operator' groups you have configured to the trunks in the “Trunk Feature
Template” applied on these Trunks.