772 Matrix PRASAR UCS System Manual
COSEC Integration
PRASAR UCS supports integration with COSEC to support Matrix COSEC Door Controllers. However, COSEC
Integration can also be used in VIP Apartments and Villa’s, wherein SPARK200 is installed.
With this integration, the users of PRASAR UCS can unlock the COSEC Door Controller using their Extended IP
Phone.
Matrix COSEC is an enterprise-grade people mobility management solution for organizations covering Time-
Attendance, Access Control, Visitor Management, Employee Self Service Portal, Roster Management, Contract
Workers Management and Cafeteria Management. To know more about Matrix COSEC, refer to COSEC
documentation or visit our website: www.MatrixComSec.com
.
How it works
• Group together extensions of PRASAR UCS that need to access the same COSEC Door Controller.
Assign a Group ID to each group. You can create 50 groups. Each group must have a unique Group ID.
• In PRASAR UCS, for integration a User Name and Password is configured. Make sure the same User
Name and Password is configured in each COSEC Door Controller you have installed. You can integrate
50 such Door Controllers with PRASAR UCS.
• Each COSEC Door Controller has a unique IP Address and port.
• Each Group ID is mapped to the IP Address and Port of the COSEC Door Controller. The extensions in the
same Group ID can only unlock the COSEC Door mapped with their Group ID.
• The extension users can open the door by dialing *7 (access code to unlock the COSEC Door,
programmable, see “Access Codes”)or by pressing the DSS key assigned to COSEC Door Open.
Standard SIP Phone users can put a call on hold by dialing #2. These users can also unlock the COSEC
Door by dialing *7.
How to configure
• Login as System Engineer.
To Next Page
Loading...