Matrix PRASAR UCS System Manual 773
• Under Configuration, click COSEC Integration to open the page.
• For COSEC Integration, enter the User Name and Password. Default User Name: admin, Password:
1234.
Make sure the same User Name and Password is configured in the COSEC Door Controllers you have
installed.
• Against each Group ID, enter the COSEC Door Controller IP Address and Port.
The same COSEC Door Controller IP Address and Port cannot be assigned to different Group ID’s.
• Click Submit.
To assign Group IDs to SIP users, see parameter COSEC Door Group in “Configuring Matrix SPARSH VP248”,
“Configuring Matrix SPARSH VP310”, “Configuring Matrix SPARSH VP330”, “Configuring Matrix VARTA ADR100/
AMP100 UC Clients”, “Configuring Matrix SPARSH VP510”, “Configuring Matrix Extended SPARSH VP710”,
“Configuring Matrix VARTA WIN200 UC Client” and “Configuring Standard SIP Phones”.
To assign a DSS key to COSEC Door Open, see “DSS Keys Programming”.
To Next Page
Loading...