1240 Matrix PRASAR UCS System Manual
Configuration Backup/Restore
PRASAR UCS provides you the facility to Backup the configuration files from the system to the hard drive and
Restore the configuration files from the hard drive to the system at the click of a button.
Restore Configuration
• To restore configuration files from any hard drive to the system, Restore Configuration option is provided.
• Click on the Browse button to reach the location on the local disk where the configuration files are stored
in PC. Make sure that the file is a zip file.
• After selecting the required configuration zip file from PC, click on the Restore button.
The system initiates the restoring of configuration zip file in flash storage. After successfully restoring and
validating the file, the system restarts with the new configuration.
If you select a file other than zip file, an error message is displayed when you click on the Restore button.
Backup Configuration
• To save the existing configuration files as backup, click the Backup Configuration button.
The PRASAR_UCS_Config_ddmmyyyy.zip window will open; where ddmmyyyy signifies the current
date.
• You can either open the zip file or save the file to a location.
To Next Page
Loading...