Matrix PRASAR UCS - Default Settings

Matrix PRASAR UCS System Manual 1249
Default Settings
What's this?
PRASAR UCS is supplied with preset values for system and feature settings, as which may be altered and
customized by users to match their requirements and preferences. The factory-set values for system and feature
settings that are automatically assigned by the system are referred to as Default Settings or standard settings.
Every configurable parameter in the system has factory-set default values, which may be changed or customized to
match user requirements and preferences.
How it works
The default settings are to be loaded or restored in the following situations:
1. Installing the PRASAR UCS in a country other than India.
PRASAR UCS provides default settings to match country/region-specific requirements of users worldwide.
The default settings are set to match user requirements of India.
So, you must select the appropriate “Configuring ‘Region’” for the country/region in which the system is
installed.
The system will load the default settings for the country/geographical region where the system is installed.
The system is designed to work efficiently with the default settings. So, if the country/region-specific
default settings match their requirements, you may not even need to alter or customize the values of
various parameters.
They may work with default settings for the most part, customizing only some of the parameters to match
their specific requirements.
The country-specific default settings of various parameters that will be loaded on changing the 'Region' are
presented in the table below. For default values of Trunk Access Codes, Configuring Emergency Number
Dialing, Distinctive Rings, for various countries refer the respective topics.
Country
Code
Country
Name
Default
Time
Zone
Default
DST
Mode
Default
DST
Schedule
Type
CPTG
a
Default
Phone
Language
Distinctive
Ring
b
Opr TAC
Abbr.
Dialing
001 Afghanistan GMT+04:30 English
002 Algeria GMT+01:00 English
003 Antigua and
Barbuda
GMT-04:00 English
004 Argentina GMT-03:00 04 Spanish
005 Australia
(Perth)
GMT+08:00 Scheduled 2 05 English 9 0
006 Australia
(Note2)
(Adelaide)
GMT+09:30 Scheduled 2 05 English 9 0