Matrix PRASAR UCS - Configuring Matrix SPARSH VP310

Matrix PRASAR UCS System Manual 157
Configuring Matrix SPARSH VP310
SPARSH VP310, the Executive IP Phone is engineered to offer a contemporary design with crystal-clear audio and
feature-rich capabilities at economical price. It functions like SPARSH VP248, the proprietary SIP-based IP Phone
for PRASAR UCS, of Matrix. To know the list of features supported, refer to “PRASAR UCS Features Supported in
Terminals”.
For instructions on how to use SPARSH VP310, refer to the common EON48_310_SPARSH VP248_310 User
Guide.
To be able to use SPARSH VP310
24
- Extended IP Phone, you must configure the following:
• SIP Extension General Parameters, see “Configuring SIP Extension General Parameters”.
• SIP Extension Settings, see “Configuring SIP Extension Settings using Jeeves”
• Extended IP Phone Settings, see “Configuring Matrix Extended Phone Settings using Jeeves”
• Voice Mail Settings, if you want to provide mailbox facility to the extension. See “Extension Voice Mail
Settings”.
Configuring SIP Extension Settings using Jeeves
• Login as System Engineer.
• Under Configuration, click VoIP Configuration.
• Click SIP Extension Settings.
The page of SIP Extension 1 opens.
24. PRASAR UCS supports only IPv4 Addresses for registering SPARSH VP310.