Matrix PRASAR UCS System Manual 911
Handover and Handoff
What is this?
Handover allows you to move an active VARTA Mobile UC Client call from the Wi-Fi network to the cellular number
(in the cellular network). This is useful when you have an ongoing call and you leave the Wi-Fi network, or if there
are voice quality issues over the Wi-Fi network.
Handoff is when you are back into the Wi-Fi network, you can move the call from the cellular number to the VARTA
Mobile UC Client. The call is moved without being disconnected and redialing the number.
PRASAR UCS will serve the Handover request only if:
• the Cellular Number is configured in the Application Settings in the Mobile Client. Refer to the
respective Mobile Client User Guide for details.
or
• the Mobile Number is configured in the system. See “Configuring Matrix VARTA ADR100/AMP100 UC
Clients”.
When the VARTA ADR100/ VARTA AMP100 application is in the background, Handoff will not be possible.
Refer VARTA ADR100 User Guide and VARTA AMP100 User Guide to know more.
How to configure
To use this feature, make sure the Basic Features are enabled in the Class of Service assigned to you. For
instructions, see “Class of Service (COS)” and “Station Basic Feature Template”.
To Next Page
Loading...