1080 Matrix PRASAR UCS System Manual
Station Message Detail Recording-Storage
What's this?
PRASAR UCS stores SMDR of Incoming calls, Outgoing Calls and Internal Calls. The call records are stored in the
SMDR buffer. For this, SMDR storage for these types of calls must be enable, and if required further filters can be
set.
PRASAR UCS can store 6000 outgoing calls, 4999 incoming calls, and 999 internal calls in the SMDR buffer. Once
the SMDR buffer is full, the next call is stored in place of the oldest call in the SMDR buffer, using the First In First
Out (FIFO) logic.
The buffer can be cleared
128
at any time from the System Administrator mode.
The SMDR buffer data is maintained even during power failures. However it is advisable to take frequent printouts
of the calls to avoid accidental loss of the data.
How to configure
To enable storage of SMDR of Outgoing, Incoming and Internal Calls, you must enable this feature in the system
and set the storage filters as per your requirement.
Configuring SMDR-Storage using Jeeves
• Login as System Engineer.
• Under Configuration, click Station Message Detail Recording.
• Click SMDR Storage Filters.
128. To comply with the Indian Government Laws and Regulation, this feature is not provided for India Region.
To Next Page
Loading...