Matrix PRASAR UCS - Page 1090

Matrix PRASAR UCS System Manual 1081
• To configure storage filters for outgoing calls, click SMDR Storage - Outgoing Calls to expand,
• Select the Store Outgoing Calls check box to enable storage of outgoing calls as per the filters you
set. If outgoing call storage is disabled, no outgoing call will be stored.
• You can limit the storage of calls to certain numbers. Select a number list and enter the desired called
party numbers in the selected list. In Store Calls of Called Number matching with Number List,
select the same list number.
• If you want outgoing calls that exceed as certain duration to be stored, set the filter Store Calls with
speech duration more than (sec) to the desired duration. All outgoing calls with duration greater than
this value, will be stored.
• If you want outgoing calls exceeding certain metering units to be stored, set the filter Store Calls with
metering units more than (units) to the desired value. All outgoing calls that have metering units
greater than this value will be stored.
• Outgoing calls made by an extension user can be transferred to another extension. In such cases, you
may enable Call Splitting if you want to charge the amount to each extension according to the duration
of speech that each extension was involved in the call.
• If Call Splitting is disabled, you have the option of charging the call amount either to the extension that
originally made the call, i.e. the Originating Extension, or to the extension that was last in speech on the
call, i.e. the Terminating Extension.
In the When Call Splitting is OFF, charge calls to field, select the desired extension you want to
charge the call to as Originating Extension or Terminating Extension.
• Select the Store Unanswered Outgoing calls check box to enable storage of unanswered outgoing
calls as per the filters you set. If this check box is disabled, unanswered outgoing calls will not be
stored.
• Click Submit.