Matrix PRASAR UCS - Configuring Matrix Extended SPARSH VP710

Matrix PRASAR UCS System Manual 213
Configuring Matrix Extended SPARSH VP710
Extended SPARSH VP710
37
, the Smart Video IP Phone is engineered to offer a contemporary design with crystal-
clear audio and feature-rich capabilities at economical price.This IP Phone is an integration of SPARSH VP710,
android based deskphone with VARTA ADR100 application. To know the list of features supported, refer to
“PRASAR UCS Features Supported in Terminals”.
For instructions on how to use Extended SPARSH VP710, refer to the EXTENDED SPARSH VP710 User Guide.
To be able to use Extended SPARSH VP710
38
, you must configure the following:
• SIP Extension General Parameters, see “Configuring SIP Extension General Parameters”.
• SIP Extension Settings, see “Configuring SIP Extension using Jeeves”.
• Extended Phone Settings, see “Configuring Matrix Extended Phone Settings using Jeeves”.
• Voice Mail Settings, if you want to provide mailbox facility to the extension. See “Extension Voice Mail
Settings”.
Configuring SIP Extension Settings using Jeeves
• Under Configuration, click VoIP Configuration.
• Click SIP Extension Settings.
The page of SIP Extension 001 opens.
• You may select the SIP Extension number you want to configure.
The parameters of the SIP Extension number you select will appear on this page.
37. Check for availability.
38. PRASAR UCS supports only IPv4 Addresses for registering Extended SPARSH VP710.