Matrix PRASAR UCS - Dynamic Lock

Matrix PRASAR UCS System Manual 831
Dynamic Lock
What's this?
Dynamic Lock allows extension users to change the Toll Control Levels (Calling Permissions) of their extensions on
their own by dialing a code.
The System Administrator/Operator can also change the Toll Control Levels of extensions using Dynamic Lock.
With this feature, extension users can prevent misuse of outgoing call facility from their extensions, especially in
their absence.
Dynamic Lock also forms the basis of 'Call Privilege', which is feature of the Hotel Application of PRASAR UCS.
Refer the PRASAR UCS Hospitality System Manual to know more.
There are four types of Toll Control Levels, starting from Level 0 to Level 3 that can be set for extension phones.
For each Toll Control Level from 0 to 3, a 'Call Privilege’
115
is to be assigned and corresponding numbers strings to
be allowed and number strings to be denied for each Call Privilege are to be programmed.
• Toll Control - Level 0 is Time Zone based, wherein the Call Privilege Type must be defined for each Time
Zone, that is, Working Hours, Break Hours and Non-Working Hours. For instance, you may define 'All
Calls' as Call Privilege for Working Hours, 'Local Calls' as Call Privilege for Break Hours and 'No Calls' as
Call Privilege for 'Non-Working' Hours.
By default, Call Privilege 'All Calls' is selected for all three Time Zones.
• Toll Control - Level 1 is not based on Time Zones. By default, the Call Privilege Type for this level is
'Local Calls'.
• Toll Control - Level 2 is not based on Time Zones. By default, the Call Privilege type set for this level is
'National Calls'.
• Toll Control - Level 3 is not based on Time Zones. By default, Call Privilege 'No Calls' is selected for this
level.
The Call Privilege for each of the above Toll Control Levels can be redefined according to user
requirements. For example, Toll Control Level 3 can be programmed for allowing all types of calls by
selecting 'All Calls' as Call Privilege Type and Level 0 can be programmed to allow only Local Calls, by
programming the strings of 'Local Numbers'.
Refer the feature description for “Toll Control” to know more.
Extension users who are allowed the Dynamic Lock feature in their Class of Service, can set the Toll
Control Level in two ways:
• Manually: the extension user changes the Toll Control Level of the extension whenever s/he wants by
dialing the feature access code.
115. The Call Privilege types are: No Calls, Local Calls, Regional Calls, National Calls, International Calls, All Calls and Limited Calls.