262 Matrix PRASAR UCS System Manual
Auto Sign-In Parameters
The system supports automatic configuration and registration of Mobile Clients — VARTA ADR100, VARTA
AMP100 applications with the Server using Auto Sign-In.
Auto Sign-In enables Mobile Clients — VARTA ADR100, VARTA AMP100 applications — to configure and register
with the server automatically at a click of a button.
For this you must:
• Configure the Auto Sign-In Parameters. For details, refer “Configuring Auto Sign-In Parameters”
• Configure the General Parameters in SIP Extensions Settings. For details, refer “Configuring SIP
Extension Settings using Jeeves”
• Make sure you send the Auto Sign-In Configuration Mail. For details, refer “Configuring SIP Extension
Settings using Jeeves”
You can also view the status of Auto Sign-In Email in “Viewing SIP Extension Status”.
How it Works
After you configure the required Auto Sign-In parameters and have sent the Auto Sign-In Mail to the Mobile Client
users, they need to follow the instructions given below:
• The Auto Sign-In mail has an attachment that contains the necessary configuration details. The Mobile
Client user must open the attachment in the Auto Sign-In mail using the VARTA ADR100 or VARTA
AMP100 application. For more information refer to the respective User Guides.
• The Server will receive the request and process it. The client will get configured and registered
automatically at any free Location 1, 2 or 3 in SIP Extension Settings. If none of the Locations are free the
request will not be served.
• You can check the Registration status in “Viewing SIP Extension Status”.
Configuring Auto Sign-In Parameters
The information you configure in Auto Sign-In Parameters will be sent in the mail to the Mobile Client user, when
you click the Send Auto Sign-In Configuration Mail button.
• Log into Jeeves as System Engineer.
• Under Configuration, click VoIP Configuration.
To Next Page
Loading...