Matrix PRASAR UCS - Configuring Emergency Number Dialing

390 Matrix PRASAR UCS System Manual
Configuring Emergency Number Dialing
If you are using the system in the Hospitality mode, to dial the Emergency Number 911, you must purchase
the Hospitality E911 license. For details, refer “License Management”.
PRASAR UCS supports dialing of Emergency Numbers immediately without any blocking.
The system will disregard features such as Toll Control, Call Budget, Automatic Number Translation, Call Duration
Control on the extensions when dialing out Emergency Numbers. To know more, refer the topic “Emergency
Dialing”.
For Emergency Number Dialing, you need to configure the Emergency Number Table. In this table, each
Emergency Number is to be assigned an Outgoing Trunk Bundle Groups (OGTB) through which the Emergency
Number is to be routed.
The system loads the default Emergency Numbers and Outgoing Trunk Bundle Group (OGTBG) in the Emergency
Number Table as per the “Configuring ‘Region’” you selected for the system. The Emergency Numbers loaded by
default in the Emergency Number Table are non-editable, but you can re-assign the default OGTB, as per your
requirement.
To use the feature “Emergency Calls (911) - Reporting to PSAP”, make sure you assign only SIP Trunks in
the outgoing trunk bundle group for dialing the number 911.
The default Emergency table as per the Region you select is given below:
Feature
Emergency
Number 1
Emergency
Number 2
Emergency
Number 3
Emergency
Number 4
Emergency
Number 5
Emergency
Number 6
Emergency
Number 7
Emergency
Number 8
Emergency
Number 9
Emergency
Number 10
Australia
000 106 112
OGTB
Group
Number
32 30 31 1 1 1 1 1 1 1
Banglade
sh
999
OGTB
Group
Number
1111111 111
Belgium
101 100 112
OGTB
Group
Number
1111111 111
Bhutan
110 112 113
OGTB
Group
Number
1111111 111
Canada
911
OGTB
Group
Number
32111111 111