98 Matrix PRASAR UCS System Manual
Configuring ‘Region’
The PRASAR UCS is a versatile system that can operate anywhere in the world, meeting the diverse customer
requirements worldwide.
To speed up the process of system configuration, PRASAR UCS is supplied with factory-set values for the system
and feature settings, referred to as “Default Settings”. These factory-set values are loaded when the system is
installed and are sufficient for getting the system into operation. However, users may alter or customize the Default
Settings to match their exact requirement.
PRASAR UCS provides Default Settings to match country/region-specific requirements of users around the world.
The system is designed to work efficiently in any country with these default settings.
To load the country-specific Default Settings, users must select the Region that is, the country in which the system
is installed.
Certain countries are divided into various regions. If you select only a different region in the same country the DST
and Date and Time Settings will only change as per the selected region. The other parameters are country-specific.
India is selected as the default Region. So, if you are installing PRASAR UCS in a country other than India, change
the Region.
Changing Region using Jeeves
• Login as System Engineer.
• Under Configuration, click Regional Settings.
• Click Region Selection.
• In the Region list, select the country where the system is installed.
• Click Submit.
To Next Page
Loading...