Matrix PRASAR UCS - Configuring Matrix SPARSH VP248

Matrix PRASAR UCS System Manual 139
Configuring Matrix SPARSH VP248
SPARSH VP248
20
, the proprietary SIP-based IP Phone for PRASAR UCS, supplied by Matrix, is a feature-rich
phone, providing voice communication over IP network. To know the list of features supported, refer to “PRASAR
UCS Features Supported in Terminals”.
For instructions on how to use SPARSH VP248, refer to the common EON48_310_SPARSH VP248_310 User
Guide.
To be able to use SPARSH VP248 - Extended IP Phone, you must configure the following:
• SIP Extension General Parameters, see “Configuring SIP Extension General Parameters”.
• SIP Extension Settings, see “Configuring SIP Extension Settings using Jeeves”
• Extended IP Phone Settings, see “Configuring Matrix Extended Phone Settings using Jeeves”
• Voice Mail Settings, if you want to provide mailbox facility to the extension. See “Extension Voice Mail
Settings”.
Configuring SIP Extension Settings using Jeeves
• Login as System Engineer.
• Under Configuration, click VoIP Configuration.
• Click SIP Extension Settings.
The page of SIP Extension 1 opens.
• You may select the SIP Extension number you want to configure.
20. PRASAR UCS supports only IPv4 Addresses for registering SPARSH VP248.