8 Matrix PRASAR UCS System Manual
Know Your SPARK200
Matrix provides the SPARK200 hardware platform to run the PRASAR UCS Application.
SPARK200
This is the enclosure and it consists of the following ports and connectors.
Ports and Connectors
Port Connector Description
24VDC-2.5A (Max) DC Jack1 To connect 24VDC, 2.5A Power Adapter.
24VDC-2.5A (Max) DC Jack2 To connect 24VDC, 2.5A Power Adapter (for Hot Redundancy).
LAN RJ45 To connect a computer or a LAN Switch.
WAN RJ45 To connect to the IP network over a DSL Modem or Router or a LAN Switch.
USB
USB to COM
Converter
(Optional)
The External USB can be used as COM Port by connecting the USB to COM
Converter.
The USB to COM Port can be used to:
• set up and run software applications — PMS and CAS.
• capture System Activity Log, System Fault log and Hotel Motel
Activity logs.
• generate SMDR reports.
To Next Page
Loading...