Matrix PRASAR UCS System Manual 9
LEDs
SPARK200 has two Power LEDs and a Status LED (STS).
The Power LED P1 depicts the status of DC Jack 1 and the Power LED P2 depicts the status of DC Jack 2.
During Redundancy, the Status LED of the Active System blinks Green, whereas the Status LED of the Standby
System blinks Orange.
SPARK200 can be rack mounted or placed on a table.
You will be able to use PRASAR UCS only after you have activated the PRASAR UCS Application license. For
further details, refer “Licenses Supported in PRASAR UCS”. To activate the supported licenses in the system, refer
to “How to activate your License”.
PRASAR UCS is easy to install and operate. The built-in web server, Jeeves, allows you to configure the system
parameters and features on-site as well as from a remote location.
Reset Switch --- To default the LAN IP and the System Engineer password.
Port Connector Description
To Next Page
Loading...