774 Matrix PRASAR UCS System Manual
Customer Name
What's this?
Customer Name is the name of the organization/enterprise that has deployed PRASAR UCS. As an user, you can
enter the name of your company/organization in the system.
When Customer Name is assigned in the system, this name will appear as header on the various System Reports
generated and printed by the PRASAR UCS like SMDR Incoming, Outgoing and Internal Call Reports, Alarm
Status reports, etc.
The Customer Name may consist of a maximum of 80 alphanumeric characters, including punctuation marks. So,
you can enter the organization's address along with the Customer Name.
How to configure
Customer Name can be configured using Jeeves at the time of installation, or any time thereafter. It can also be
corrected or changed any time.
Configuring Customer Name using Jeeves
• Login as System Engineer.
• Under Configuration, click System Prerequisites.
•In Customer Name, enter the name (and address, if desired) of the organization/enterprise. For example:
Prudent Investment, 701 Sunshine Boulevard, Bannerghatta, Bangalore.
• Click Submit.
To Next Page
Loading...