Matrix PRASAR UCS - Page 154

Matrix PRASAR UCS System Manual 145
extension with lower priority, a triple ring is placed on the called extension. To know more, read the feature
description “Priority”.
If this SIP extension is assigned to Operator, you may want to set a higher priority for this extension.
• Click Submit to save your SIP Extension Settings.
Configuring Matrix Extended Phone Settings using Jeeves
You can register three Matrix Extended IP Phones/UC Clients at three different locations as a single SIP
Extension. You can connect/register the same or different types of Extended Phones/UC Clients —SPARSH
VP248, SPARSH VP310, SPARSH VP510, SPARSH VP330, Matrix VARTA UC Clients or MATRIX
VARTA WIN200 Desktop UC Client — at each location. In this case we assume that SPARSH VP248 is connected
at Location 1, 2 and 3.
If you want to use more than one SPARSH VP248 Extended IP Phones as a SIP Extension, configure their settings
at Location 1, Location 2 and Location 3.
If you have connected SPARSH VP330 at any of the locations, refer to “Configuring Matrix SPARSH VP330”.
If you have connected SPARSH VP310 at any of the locations, refer to “Configuring Matrix SPARSH VP310”.
If you have connected SPARSH VP510 at any of the locations, refer to “Configuring Matrix SPARSH VP510”.
If you have connected the Matrix Extended SPARSH VP710 as SIP Extensions, for configuration instructions see
“Configuring Matrix Extended SPARSH VP710”.
If you have registered Matrix VARTA ADR100 and VARTA AMP100 Mobile UC Clients in any of the locations, refer
to “Configuring Matrix VARTA ADR100/AMP100 UC Clients”.
If you have registered MATRIX VARTA WIN200 Desktop UC Client in any of the locations, refer to “Configuring
Matrix VARTA WIN200 UC Client”.