Matrix PRASAR UCS System Manual 1239
A new window opens which provides the option for uploading the CA-signed certificate and Private key.
• Upload CA-signed Certificate: Click the Browse button to reach the location on the local disk where the
CA-Signed Certificate is stored in the PC. The valid formats for certificate are .cer, .crt and .pem.
• Upload Private Key: Click the Browse button to reach the location on the local disk where the Private key
is stored in the PC. The valid formats for key are .pem and .key.
• Private Key Pass-Phrase (optional): Enter the Private Key Pass-Phrase for decrypting the private key.
Make sure that you enter the same Private Key Pass-Phrase that was configured during generation of the
CSR.
If you have not configured any Pass-Phrase during generation of CSR, that is, Private Key is not Pass-
Phrase protected, then you may leave this field blank.
• Click the Upload button to upload the CA-Signed Certificate and the Private key.
A message appears to confirm that the Certificate has been uploaded successfully.
• Click OK to close the window. You will be redirected to the Certificate Management page.
The CA-Signed System Certificate you uploaded will appear in the Certificates list.
To delete a System Certificate, click .
To download the Root Certificate or CA-Signed System Certificate, click .
To Next Page
Loading...