182 Matrix PRASAR UCS System Manual
extension with lower priority, a triple ring is placed on the called extension. To know more, read the feature
description “Priority”.
If this SIP extension is assigned to Operator, you may want to set a higher priority for this extension.
• Click Submit to save your SIP Extension Settings.
Configuring Matrix Extended Phone Settings using Jeeves
You can register three Matrix Extended Phones/Soft Clients at three different locations as a single SIP Extension.
You can connect the same or different types of Extended Phones/Soft Clients —SPARSH VP248, SPARSH VP310,
SPARSH VP510, SPARSH VP330, Matrix VARTA ADR100 Mobile UC Client, Matrix VARTA AMP100 Mobile UC
Client or MATRIX VARTA WIN200 Desktop UC Client — at each location. In this case we assume that SPARSH
VP330 is connected at Location 1, 2 and 3.
If you have connected SPARSH VP248 refer to “Configuring Matrix Extended Phone Settings using Jeeves” in
Configuring Matrix SPARSH VP248 as SIP Extensions.
If you have connected SPARSH VP310 at any of the locations, refer to “Configuring Matrix SPARSH VP310”.
If you have connected SPARSH VP510 at any of the locations, refer to “Configuring Matrix SPARSH VP510”.
If you have connected the Matrix Extended SPARSH VP710 as SIP Extensions, for configuration instructions see
“Configuring Matrix Extended SPARSH VP710”.
If you have registered Matrix VARTA Mobile UC Clients in any of the locations, refer to “Configuring Matrix VARTA
ADR100/AMP100 UC Clients”.
If you have registered MATRIX VARTA WIN200 Desktop UC Client in any of the locations, refer to “Configuring
Matrix VARTA WIN200 UC Client”.
If you want to use more than one SPARSH VP330 Phones as a SIP Extension, configure their settings at Location
1, Location 2 and Location 3.
To Next Page
Loading...