Matrix PRASAR UCS System Manual 181
Advanced Configuration Parameters
• If you want to provide other features like Personal Directory, Priority, or assign a Station Type to the SIP
Extension, click the Advanced button at the bottom of the page.
• Enter the Mobile Number of the extension user you wish to store. The Number can be a maximum of 16
digits.
• If you are using the system in the Enterprise Mode, by default Administrator is selected as Station Type.
If you are using the system in the Hotel Mode, by default Guest is selected as Station Type. You may
select the Station Type as Administrator for the Hotel Administrative Staff. To know more refer to the
PRASAR UCS Hospitality System Manual.
• You may assign a Personal Directory number to the SIP Extension. Default: 00.
A Personal Directory is a list of 25 frequently dialed numbers, each of which are stored by Index number
(location code), Name and Trunk Access Codes ("Out Going Trunk Bundle Group Index"). The Personal
Directory is necessary for using the features “Abbreviated Dialing” and “Dial By Name”.
When a Personal Directory is assigned to a SIP Extension, make sure you also configure this directory.
The Personal Directory can be programmed by the SIP Extension users and by the System Engineer.
Refer the topic “Abbreviated Dialing” for instructions on programming the Personal Directory.
If Personal Directory is not to be assigned, enter 00 in this field.
• Select a Priority Level for the SIP Extension from 1 to 9. Default; 5-Normal.
Each extension of the PRASAR UCS is assigned a Priority Level starting from 1, 2, 3... to 9, with '1' being
lowest Priority and '9' being highest Priority. Whenever an extension (phone) with higher priority calls an
To Next Page
Loading...