Matrix PRASAR UCS - Page 1016

Matrix PRASAR UCS System Manual 1007
• You can change message number 6 to 9 as desired. The string may consist of a maximum of 16
characters. All ASCII characters except <, >, :, ", /, \, |, ?, * are allowed.
• Click Submit.
• Under Configuration, click VoIP Configuration.
• Click SIP Extension Settings.
• Now, go to the desired SIP Extension number for which you want to enable the features PUBLISH and
Presence Subscription. By default both features are disabled. Click the respective check boxes to enable
the features.
• Click Submit.
How to use
This feature requires you to dial your User Password. The default User Password 1111 is not accepted. Please
change the User Password first.
Publish Presence can be set for an extension also from the System Administrator mode.
For Extended IP Phone Users
Publishing Presence by Extension User
• Press DSS Key assigned to PUBLISH presence.
OR
•Dial 104
• Enter User Password on the prompt.
• Scroll to the desired Publish message from the menu:
• Absent
• Present
• Auto Detect
•Away
• On the Phone
• Do Not Disturb
• I am Mobile
• In Meeting
• Out for Meal
• Out of Office
• Press Enter key to select message.
• You get the confirmatory tone.
Publishing Presence from SA Mode
• Press DSS Key assigned to PUBLISH presence.
• Enter Destination Number, that is, the number of the extension Publish Presence is to be set.
• Scroll to the desired Publish message from the menu:
• Absent
• Present